CineStill

The brands · ~5 min read

CineStill (a family business run by brothers Brandon and Brian Wright, Los Angeles) built its name on one idea: take Kodak’s Vision3 cinema negative, remove the remjet backing at the factory, respool it into DX-coded 35 mm cassettes, and sell it for ordinary C-41 processing. See Cinema film, remjet and ECN-2 for the underlying tech.

In short

  • 800T – Kodak Vision3 500T (tungsten, 3200 K), rated ISO 800. The original CineStill film; the neon-halation night-photography look.

  • 50D – Vision3 50D (daylight, 5500 K), ISO 50. Finest grain, best in bright light.

  • 400D (“400Dynamic”, 2022) – a daylight-balanced ISO 400 negative; CineStill’s most versatile film, also in 120.

  • BwXX – Kodak Double-X (5222), a 1959 B&W cine negative, ISO 250. Classic gritty monochrome; develop in normal B&W chemistry.

  • No remjet → halation: a red-orange glow around bright light sources. The signature, and the point.

Why it glows

Remjet is Vision3’s anti-halation backing. Removing it at the factory (so the film survives a C-41 line) also removes that protection. Light from a bright point – a streetlight, a window, a candle – passes through the emulsion, reflects off the camera’s pressure plate and the film back, and re-exposes the surrounding red-sensitive layer, producing a soft crimson halo. On 800T at night this is unmistakable and has become a whole aesthetic.

50D and 400D show it far less (less contrasty subjects, daylight balance), but it’s still there around specular highlights.

The films

Film

ISO

Base

Notes

50D

50

Vision3 50D

Daylight. Extremely fine grain, natural cinema colour, wide latitude. Needs good light or a tripod. Process C-41.

400D

400

Vision3-derived daylight

The all-rounder: daylight-balanced, ISO 400, moderate contrast, gentle halation. 35 mm and 120. Process C-41.

800T

800 (Vision3 500T, rated +⅔)

Vision3 500T

Tungsten-balanced – shoot indoors / at night under artificial light and it’s neutral; in daylight it goes blue unless you use an 85B (orange) filter or correct in post. Rated ISO 800, best at EI 400–800, pushes to 1600–3200. The famous one. Process C-41.

BwXX

250

Kodak Double-X 5222

Panchromatic B&W cine negative from 1959, unchanged. Chunky grain, strong contrast, a true “old movie” look (it shot much of Schindler’s List, Casino Royale flashbacks, etc.). Develop in D-76, HC-110, Rodinal – not C-41.

Chemistry and hardware

CineStill also sells:

  • Cs41 (“Color Simplified”) – a liquid C-41 kit tolerant of a wider temperature range than traditional kits.

  • Cs6 – a 3-bath E-6 slide kit for home use.

  • DF96 (“D-F-96”) monobath – develop and fix B&W in one solution, one step, one temperature-flexible bath (~3–6 min). Hugely popular for beginners.

  • TCS temperature-control system, and the CS-TCP-1 (“The Camera Post-1”? – the CS-TCP film-scanning workflow) – CineStill’s take on DSLR/mirrorless scanning.

Myth vs reality

“CineStill 800T is just expensive Portra 800.” They are different emulsions (Vision3 500T vs Kodak’s still 800 negative), different colour balance (tungsten vs daylight), and only CineStill has the deliberate halation. If you want neutral daylight low-light colour, Portra 800 is the better, more predictable choice. If you want the cinematic tungsten-at-night glow, nothing else does it out of the box.

Fun fact

CineStill started in 2012 as a small hand operation, the brothers removing remjet and respooling film themselves, and ran a Kickstarter in 2014 to bring the films to medium format. It is now a real manufacturer-adjacent brand with its own chemistry line, and it arguably did more than anyone to make “shooting movie film” a mainstream idea among still photographers.

Where to go next