Colour reversal (slide) film¶
Reversal film – “slide”, “transparency”, “diapositive”, “E-6”, “chrome” – produces a positive image directly on the film. Hold it to the light and you see the photograph, right way round, in full colour, with a black so deep and colours so saturated that no print or screen quite matches it.
In short
The processed film is the final image – no negative, no printing stage. What the film records is what you get.
Because there’s no printing stage to add contrast, the film itself is high-contrast and its curve has an almost vertical highlight wall.
Latitude is about ±½ stop. A blown highlight is clear film, forever. Meter for the highlights; err toward slight underexposure.
Processed in E-6 (standardised, but far fewer labs than C-41).
Current stocks: Fujifilm Velvia 50, Velvia 100, Provia 100F; Kodak Ektachrome E100. Plus B&W reversal (Fomapan R100) and specialty (Lomochrome).
Why it’s unforgiving – and why people love it anyway¶
Colour negative can dump its excess dynamic range into a soft shoulder because a human (or scanner) interprets the negative later. Slide film has no later – the transparency is the deliverable, historically projected or put on a lightbox for a picture editor. So it is built:
steep (contrast ~1.7+ vs ~0.6 for negative), for punch on projection;
with a short toe and abrupt shoulder, so both ends clip hard;
with Dmax ~3.5–4.0, a black deeper than print or screen can show.
The result within its ~5-stop range is spectacular – luminous, dimensional, saturated. Outside it, highlights are paper-white nothing and shadows are featureless black.
Key idea
Negative film: expose for the shadows. Slide film: expose for the highlights. On a slide, a clipped highlight cannot be recovered by any means – there is no density there to pull detail from. Protect the highlights and let the shadows fall where they may. Many slide shooters meter the brightest important area and place it ~2 stops above middle grey, or use an incident meter and trust it, bracketing ±⅓–½ stop for anything critical.
The current slide films¶
Film |
ISO |
Character |
|---|---|---|
Fujifilm Velvia 50 (RVP 50) |
50 |
The most saturated colour film ever sold. Vivid greens and reds, deep blue skies, extreme micro-contrast, finest grain. Not for skin – it makes people look sunburnt. Landscape and nature legend. Needs a tripod and good light. Reciprocity failure sets in past ~1 s. |
Fujifilm Velvia 100 (RVP 100) |
100 |
A stop faster, marginally less berserk than Velvia 50 but still highly saturated. Fuji withdrew it from the US in 2021 after a trace emulsion chemical (PIP 3:1) fell foul of a new EPA rule; it kept selling elsewhere and has since drifted back onto Fuji’s US listings, but supply is erratic. |
Fujifilm Provia 100F (RDP III) |
100 |
The “professional neutral” slide. Accurate colour, moderate saturation, good skin, excellent reciprocity to ~2 min. The sensible all-round chrome. Scans well. |
Kodak Ektachrome E100 |
100 |
Relaunched 2018. Clean, fairly neutral with a slight cool-clean bias, very fine grain, lower contrast than Velvia. Kodak’s only current slide film; the 120 and sheet versions came later. |
Fomapan R100 |
100 |
Black-and-white reversal – process to a B&W transparency (dedicated reversal kit or lab). Nice for projection and for a positive B&W original. |
Lomography Lomochrome series (Purple, Turquoise, Metropolis is neg) |
varies |
Colour-shifting art films (Lomochrome Purple turns greens magenta). Some are C-41 negative, not E-6 – check before processing. |
Discontinued but still floating around |
– |
Fuji Astia 100F (soft, best-ever slide for skin), Sensia, Provia 400X; Kodak Elite Chrome, E200, Kodachrome (needs mentioning: unique non-substantive process, dead since 2010 – see Discontinued legends). |
Fun fact
National Geographic ran on Kodachrome and then Fujichrome for decades. Editors could lay hundreds of slides on a lightbox and judge them instantly – no printing, no interpretation, everyone seeing the same thing. That workflow, not aesthetics alone, is why slide film was “the professional’s film” through the 1990s. Colour negative won for weddings and portraits precisely because its latitude covered the photographer’s mistakes.
E-6 processing¶
Six chemical steps (first developer → wash → reversal bath → colour developer → pre-bleach → bleach → fix → final rinse), tightly temperature-controlled at 38 °C. It is standardised – any E-6 lab or kit gives consistent results – but far fewer labs offer it than C-41, turnaround is longer, and home E-6 kits (Bellini, CineStill Cs6, Tetenal) exist but demand precise temperature control. Details in E-6: slide processing.
Cross-processing slide film in C-41 (“xpro”) is a deliberate abuse: high contrast, crazy casts (usually green/yellow), blown highlights. A look, not a mistake – see ECN-2 and cross-processing.
Projecting slides¶
The original delivery medium and still the best way to see them: a slide projector with a good lens throws a 2 m image with a brightness range and colour depth that a screen can’t touch. Mounted slides (cardboard or plastic 5×5 cm mounts) drop straight into carousels or trays. Medium-format slides go in a lightbox with a loupe. This is a real reason to shoot slide that scanning doesn’t capture.
Choosing¶
You want… |
Shoot |
|---|---|
Landscapes, maximum colour, tripod |
Velvia 50 |
All-round slide, people included, neutral |
Provia 100F |
Clean modern look, a bit cooler, Kodak colour |
Ektachrome E100 |
To project black-and-white positives |
Fomapan R100 |
A deliberate colour-shift art look |
Lomochrome Purple (check the process!) |
Where to go next
Latitude, contrast and dynamic range – why ±½ stop is all you get.
Metering and exposure in practice – metering for highlights in practice.
E-6: slide processing – the process, and home E-6.