Glossary¶
Cross-references point to the chapter where a term is explained in full.
- acutance¶
An objective measure of how sharply a film renders an edge (the steepness of the density transition across a boundary). High-acutance developers (Rodinal) and edge effects raise perceived sharpness independently of resolving power. See Grain, granularity and sharpness.
- antihalation layer¶
A dark coating on or under the film that absorbs light passing through the emulsion so it can’t reflect off the back surface and halo bright highlights. Removed or bleached in processing. Its absence (e.g. remjet-free CineStill film) causes halation.
- ASA¶
The old American arithmetic film-speed scale (doubling the number = one stop). Now the arithmetic half of the ISO designation. See Film speed: ASA, DIN, ISO and EI.
- base + fog¶
The minimum density of a developed film – the tint of the base plus a few spontaneously developed grains. The zero reference for speed and curve measurements.
- base¶
The transparent plastic support the emulsion is coated on: cellulose triacetate (“acetate”) or polyester (PET / ESTAR). See What is film, really?.
- blix¶
A combined bleach + fix bath used in home C-41 / E-6 kits. Simpler than separate baths but less robust.
- C-41¶
The standard process for colour negative film. Colour developer → bleach → fix → stabiliser at 37.8 °C. See C-41: colour negative processing.
- characteristic curve¶
The plot of density vs log exposure – the H&D curve. Its shape defines a film’s contrast, latitude and dynamic range. See The characteristic curve.
- chromogenic¶
“Colour-generating.” A process in which oxidised developer couples with dye couplers to form the image dye (C-41, E-6). Chromogenic B&W (Ilford XP2 Super) makes a grey dye image via C-41.
- contrast index (CI)¶
- contrast index¶
A practical average slope of the characteristic curve between two defined points (toe included). A “normal” pictorial CI is ~0.56–0.62. Compare gamma.
- couplers¶
Colourless (or, for masking, coloured) molecules in each emulsion layer that react with oxidised colour developer to form cyan / magenta / yellow dye. See How colour film works.
- cross-processing¶
Deliberately developing a film in the “wrong” chemistry – usually slide film in C-41 (“xpro”) – for high contrast and colour casts. See ECN-2 and cross-processing.
- DIN¶
The old German logarithmic film-speed scale (+3° = one stop). Now the logarithmic half of the ISO designation (
ISO 400/27°).- DIR coupler¶
A Development-Inhibitor-Releasing coupler: releases a diffusing inhibitor as it forms dye, suppressing development in adjacent areas/layers to boost sharpness and colour accuracy.
- Dmax / Dmin¶
The maximum / minimum density a film can produce. Slide film’s high Dmax (~3.8) is why projected slides look so rich.
- DX code¶
The chequerboard pattern and barcode on a 35 mm cassette encoding film speed, exposure count and latitude for cameras and labs to read.
- dynamic range¶
The span of scene brightness a film can record, from usable shadow to held highlight, in stops. Negative film ~12–14+; slide film ~5–6. See Latitude, contrast and dynamic range.
- E-6¶
The standard process for colour reversal (slide) film. First developer → reversal → colour developer → bleach → fix, at 38 °C. See E-6: slide processing.
- ECN-2¶
The process for Kodak motion-picture negative (Vision3). Includes remjet removal; developer runs at 41.1 °C. See ECN-2 and cross-processing.
- edge effects¶
- adjacency effects¶
Local development differences at a light/dark boundary (developer exhausted on the dense side, fresh on the thin side) that create a sharpening “halo”. Enhanced by compensating developers and minimal agitation.
- EI (exposure index)¶
The speed you actually rate a film at, which may differ from box ISO on purpose. Shooting at a higher EI than box = underexposing = a push. See Film speed: ASA, DIN, ISO and EI.
- emulsion¶
The light-sensitive coating: silver halide crystals suspended in gelatin, plus sensitising dyes and (in colour) couplers.
- fixing¶
- hypo¶
Dissolving undeveloped silver halide with sodium/ammonium thiosulfate so the image is permanent and no longer light-sensitive. See How a photograph forms.
- fog¶
Density that is not part of the image: spontaneously developed grains, over- sensitisation, age, heat, stray light, or overdevelopment. Raises base + fog.
- gamma¶
The slope of the straight-line portion of the characteristic curve – a measure of contrast. Compare contrast index.
- grain¶
- granularity¶
Grain = an individual silver-halide crystal (or the dye cloud / silver filament it becomes). Granularity = the objective, measurable clumpiness (quoted as RMS). Graininess = the subjective impression, which also depends on enlargement. See Grain, granularity and sharpness.
- H&D curve¶
Hurter & Driffield’s 1890 name for the characteristic curve.
- halation¶
A glow around bright light sources caused by light reflecting off the film’s back surface – visible when the antihalation layer is missing or weak (classic CineStill 800T look).
- incident metering¶
Measuring the light falling on the subject (handheld meter, white dome) rather than light reflected off it. Immune to subject-reflectance errors. See Metering and exposure in practice.
- ISO¶
The current international film-speed designation, fusing ASA (arithmetic) and DIN (logarithmic):
ISO 400/27°. On film it is a fixed, measured property, not an adjustable setting.- latent image¶
The invisible cluster of a few silver atoms formed on exposed crystals. Development amplifies it ~10⁸–10¹⁰× into a visible image. See How a photograph forms.
- latitude¶
How far exposure can be wrong and still give a usable result – dynamic range minus the subject’s own brightness range. Asymmetric: negative film forgives overexposure, slide film forgives neither.
- masking couplers¶
- orange mask¶
Coloured couplers in colour negative film that form a positive coloured image correcting the image dyes’ unwanted absorptions. The reason negatives look orange. See How colour film works.
- monobath¶
A single solution that develops and fixes B&W film in one step (e.g. Cinestill DF96). See Black-and-white development.
- MTF¶
Modulation Transfer Function – a film’s contrast response vs spatial frequency; a fuller description of sharpness than a single resolving-power number.
- orthochromatic¶
- panchromatic¶
Ortho = sensitive to blue + green but not red (safelight-safe, dark skies/lips). Pan = sensitive across the whole visible spectrum (the modern norm). See Spectral sensitivity: what colours the film can see.
- pull¶
Rating a film slower than box speed and reducing development → lower contrast, richer shadows. See Pushing and pulling film.
- push¶
Rating a film faster than box speed and extending development → a usable image from an underexposed frame, at the cost of contrast, grain and shadow detail.
- reciprocity failure¶
The breakdown of “exposure = intensity × time” at very long (or very short) exposures – film acts slower and (in colour) shifts hue. See Reciprocity failure.
- remjet¶
A black carbon anti-halation / anti-static backing on motion-picture film that must be physically removed in ECN-2 processing. Incompatible with C-41 machines. See Cinema film, remjet and ECN-2.
- reticulation¶
A cracked-mud grain texture caused by a large temperature difference between processing baths swelling and shrinking the gelatin.
- reversal film¶
Film that processes to a positive image on the film itself – slide / transparency / “chrome”. See Colour reversal (slide) film.
- RMS granularity¶
A numeric grain measure: the standard deviation of density through a 48 µm aperture at density 1.0, ×1000. ~8 = very fine, ~17+ = coarse.
- silver halide¶
The light-sensitive salts – silver bromide, chloride, iodide – that form the image- recording crystals in every conventional film. See Silver halide: the light-sensitive heart of film.
- spectral sensitisation¶
Adding dyes to the crystal surface to extend its response from native blue-only into green, red or infrared.
- stop (exposure)¶
A factor of two in light. Aperture, shutter and film speed are all stop scales, so they trade one-for-one. See Exposure on film.
- Sunny 16¶
A meterless exposure rule: in bright sun, f/16 at a shutter of 1/ISO.
- T-grain¶
- tabular grain¶
Flat, plate-like silver-halide crystals (Kodak T-Max / Portra / Ektar; Ilford Delta) that present more light-catching area per unit of silver → finer grain and more sharpness at a given speed. Compare cubic grain (Tri-X, HP5+).
- toe / straight line / shoulder¶
The three regions of the characteristic curve: shadows (rising slope), midtones (constant slope = contrast), highlights (flattening slope).
- Zone System¶
Ansel Adams & Fred Archer’s method of previsualising tones (Zone 0–X, each one stop), metering to place a shadow, and developing to place the highlights. See Metering and exposure in practice.
Where to go next
Further reading – where to go deeper.
FilmLab – back to the start.